What does the CNC PU foam seal gasket machine bring to the industry
CNC PU Foam Seal Gasket Machine is a special automatic machine for fluid control, which can drip, coat the surface of the product or the inside of the product. Today, let's take a closer look at the working principle of the CNC PU Foam Seal Gasket Machine.
The working principle of the CNC PU Foam Seal Gasket Machine can be roughly divided into three parts.
1. Fluid mixing and transmission: The CNC PU Foam Seal Gasket Machine drives the screw (or turbine) by the motor, and then the screw (or turbine) makes a pair of stainless steel mesh belt in a certain speed and pressure for radial movement, so as to achieve a variety of different viscosity of the fluid is fully mixed.
2. Fluid drip and coating: When the agitated fluid enters the bottom of the stirring container through the discharge tank, the flow will be accelerated by the action of two blades rotating in opposite directions and generate eddy currents, so that the air in the container is discharged to form negative pressure, and the high temperature hot gas generated by the high-speed agitation in the container will make the gas originally dissolved in the liquid evaporate into vapor from the exhaust pipe. In this way, the mass transfer and mixing process of the two media is completed in a sealed container.
3. Piston movement and glue quantity control: compressed air is sent into the glue bottle (syringe), and the glue is pressed into the feed tube connected with the piston chamber. When the piston is in the upper stroke, the piston chamber is filled with glue. The amount of glue that drips out is determined by the distance of the piston down punch and can be adjusted manually or controlled in software.
Please note that the specific working principle of the CNC PU Foam Seal Gasket Machinemay vary depending on the design and configuration. The above is a common working principle for your reference.
What are the application industries of CNC PU Foam Seal Gasket Machine?
CNC PU Foam Seal Gasket Machine can be used in many different industries, the following are some of the main application industries:
1.Electronics industry: mobile phone key dispensing, mobile phone battery packaging, laptop battery packaging, computer speaker/receiver, coil dispensing, PCB board bond sealing, IC sealing, horn outer ring dispensing, etc.
2. Lighting industry: mainly used for packaging and production of LED products. For example, LED phosphor dispensing, LED drive power heat conduction potting, hard light strip, soft light strip potting, bulb lights, lighting and other seals, LED street lights bonding and sealing.
3. Automotive industry: mainly used for auto parts dispensing and lamp packaging. Such as spot welding seal, engine module potting, auto parts dispensing, dust cover sealing, fender dispensing, lamp dispensing, etc.
4. Industrial electrical, solar photovoltaic: can be used in sensor packaging, relay packaging, coil packaging, capacitor packaging, solar panel packaging and so on.
5. Construction engineering, hardware, home appliances: can be used for doors and Windows seal, glass curtain wall seal, ceramic tile pressure test, ceramic tile cement coating, curtain rod glue, windshield wiper guide groove glue.
Application range of the CNC PU Foam Seal Gasket Machine
Suitable for coating dry high viscosity liquid sealant, can be used for small batch production, mass production of the assembly line, the end surface, thread, weld and other coating of mechanical parts. Such as automobile windshield sealant, all kinds of weld sealant and single component silicone glue coating, LED module waterproof coating, solar panel coating waterproof glue, washing machine air cooler waterproof coating.
For the future development of the CNC PU Foam Seal Gasket Machine, due to the influence of practical and widely used, the CNC PU Gasket Machine demand will be more and more big, from a long-term point of view this is certainly good, because with the increased demand, the CNC PU Gasket Machine upgrade speed, also to the quality and technical requirements are higher and higher. So let's wait and see for the future development of the CNC PU Gasket Machine!If you have any needs of the CNC PU Gasket Machine, you are welcome to contact SHZ Power at any time, we will answer any questions you have online.
